{"product_id":"rfx-1110846001","title":"RFX PRO SOLID-TIP BRAKE PEDAL, BLK\/BLU","description":"\u003cp\u003eRFX Pro Series Brake Pedals are designed and tested at the highest level.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Brake Pedals are manufactured from 7075-T6 aluminium and feature an OEM type forged shaft, a smooth finish on the shaft helps to reduce the wear associated with a ridged design.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Flexible tips are CNC machined billet aluminium and feature a spring loaded rotatable tip which under impact such as in a rut will spin to reduce damage. The tip also features steel teeth to help grip in muddy conditions.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Flexible tips also incorporate a stop on the pivot tip, this stops the tip at 90 degrees of rotation preventing damage that can occur if the tip rotates under the clutch cover.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Brake Pedals also incorporate a cable brake snake, this helps prevent the pedal shaft being bent around in a collision.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul type=\"disc\"\u003e \u003cli\u003eNew 7075-T6 Billet solid tip, with flow design.\u003c\/li\u003e \u003cli\u003eNew 2 position adjustability on tip.\u003c\/li\u003e \u003cli\u003eNew optional Hard Anodized tip version available for current models. \u003c\/li\u003e \u003cli\u003eNew style brake snake with adjustable clamp.\u003c\/li\u003e \u003cli\u003eNew Hard anodized black shaft to prevent corrosion and reduce wear.\u003c\/li\u003e \u003cli\u003eReplaceable Stainless Steel teeth for increased grip.\u003c\/li\u003e \u003cli\u003eSupplied complete with bearings and bushes for selected models.\u003c\/li\u003e \u003cli\u003eLaser etched logo.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitting Instructions:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul type=\"disc\"\u003e \u003cli\u003eStart by taking note mark where the height if the pedal tip is in relation to the footpeg.\u003c\/li\u003e \u003cli\u003eRemove the R-clip or split pin from the rear of the brake bolt located behind the frame.\u003c\/li\u003e \u003cli\u003eRemove the pivot bolt holding the pedal to the frame.\u003c\/li\u003e \u003cli\u003eDetach the return spring from the pedal and leave hanging. \u003c\/li\u003e \u003cli\u003eSpin the pedal outwards exposing the split pin at the rear of the pedal clevis.\u003c\/li\u003e \u003cli\u003eRemove this split pin and the locating dowel, the rear brake pedal will now remove.\u003c\/li\u003e \u003cli\u003eRemove the oil seals from the old pedal clean and re-fit to the new pedal.\u003c\/li\u003e \u003cli\u003eClean all the parts with a multi-purpose lube such as maxima MPPL, ready for re-installing.\u003c\/li\u003e \u003cli\u003eRe- fit the Brake clevis, Locating pin and split pin.\u003c\/li\u003e \u003cli\u003eRe-Fit the return spring.\u003c\/li\u003e \u003cli\u003eApply some Maxima waterproof grease to the pivot bolt align the pivot hole and re-fit the bolt.\u003c\/li\u003e \u003cli\u003eTorque the pivot bolt to the required torque as per the owner’s manual.\u003c\/li\u003e \u003cli\u003eRe-fit the R-clip\/Split pin to the rear of the pivot bolt.\u003c\/li\u003e \u003cli\u003eWith the pedal now attached adjust the pedal height to the correct position and free play, do this by loosening the nut above the clevis and turning the plunger bolt inwards or outwards to suit.\u003c\/li\u003e \u003cli\u003eNow fit the brake snake.\u003c\/li\u003e \u003cli\u003eJapanese models- Remove the lower engine mount nut and washer, replace the old washer with the new washer which is attached to the brake snake.\u003c\/li\u003e \u003cli\u003eKTM models- Remove the new washer which is attached to the brake snake, put this aside as it’s not required on the KTM, loop the cable around the lower engine mount and replace inside the crimp fitting.\u003c\/li\u003e \u003cli\u003e Set the correct tension on the brake snake, remembering to allow for the pedal to extend down. \u003c\/li\u003e \u003cli\u003eCrimp the fitting together using pliers and trim excess cable.\u003c\/li\u003e \u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Default Title","offer_id":47926596141271,"sku":"1110846001","price":66.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/7016\/0343\/files\/800Wx800H-1110846001-1.jpg?v=1764690410","url":"https:\/\/powerhousesuperstore.com\/en-nl\/products\/rfx-1110846001","provider":"Powerhouse Superstore","version":"1.0","type":"link"}